北京正智远东
中国领先化学品法规服务机构
中国领先化学品法规服务机构
微信扫一扫，关注正智远东
微信扫一扫，关注正智远东
2012年10月23日，欧盟在官方公报（OJ）上发布关于EMC指令（2004/108/EC）和R&TTE指令（1999/5/EC）的最新协调标准清单。
协调标准（CEN、CENELEC和ETSI标准）可用于证明产品符合新方法指令的基本要求。与协调标准同时公布的还有“推断符合性中表2 R&TTE指令协调标准清单中的新标准及其实施日期中止期”（DoC），全称为“被替代标准的符合推断性的中止期”（Date of cessation of presumption of conformity of superseded standard），DoC相当于新标准的实施日期。对于某一新版标准，超过DoC，被替代标准（旧标准）及其所有增补件在安全方面不再胜任技术进步和良好工程规范的要求，从而不再具有推断符合性；对于某一标准的增补件，超过其对应的DoC，被修订的标准必须与此增补件一同使用才具有推断符合性。
表1和表2分别列出了此次公布的EMC指令和R&TTE指令最新协调标准清单中，“推断符合性中止期”（DoC）在2012年10月之后的新标准或增补件：
表1 EMC指令协调标准清单中的新标准及其实施日期
| 标准编号及采用国际标准 | 标准名称 | DoC |
| EN 50065-1:2001/A1:2010 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances | 2012.10.01 |
| EN 50065-1:2011 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances | 2014.03.21 |
| EN 50083-2:2012 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment | 2013.06.21 |
| EN 50491-5-1:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up | 2013.04.01 |
| EN 50491-5-2:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment | 2013.04.01 |
| EN 50491-5-3:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment | 2013.04.01 |
| EN 50498:2010 | Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicle | 2013.07.01 |
| EN 50529-1:2010 | EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires | |
| EN 50529-2:2010 | EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables | |
| EN 50550:2011 | Power frequency overvoltage protective device for household and similar applications (POP) | |
| EN 55011:2009/A1:2010 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | 2013.07.01 |
| CISPR 11:2009/A1:2010 | ||
| EN 55022:2010 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | 2013.12.01 |
| CISPR 22:2008 (Modified) | ||
| EN 55024:2010 | Information technology equipment - Immunity characteristics - Limits and methods of measurement | 2013.12.01 |
| CISPR 24:2010 | ||
| EN 60034-1:2010 | Rotating electrical machines - Part 1: Rating and performance | 2013.10.01 |
| IEC 60034-1:2010 (Modified) | ||
| EN 60669-2-1:2004/A12:2010 | Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches | 2013.06.01 |
| EN 60730-1:2011 | Automatic electrical controls for household and similar use - Part 1: General requirements | 2013.10.01 |
| IEC 60730-1:2010 (Modified) | ||
| EN 60730-2-5:2002/A2:2010 | Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems | 2013.03.01 |
| IEC 60730-2-5:2000/A2:2008 (Modified) | ||
| EN 60730-2-7:2010 | Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches | 2013.10.01 |
| IEC 60730-2-7:2008 (Modified) | ||
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls | 2013.11.01 |
| IEC 60730-2-9:2008 (Modified) | ||
| EN 60730-2-15:2010 | Automatic electrical controls for household and similar use - Part 2- 15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | 2013.03.01 |
| IEC 60730-2-15:2008 (Modified) | ||
| EN 60947-1:2007/A1:2011 | Low-voltage switchgear and controlgear - Part 1: General rules | 2014.01.01 |
| IEC 60947-1:2007/A1:2010 | ||
| EN 60947-3:2009/A1:2012 | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | 2015.03.21 |
| IEC 60947-3:2008/A1:2012 | ||
| EN 60947-4-1:2010 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | 2013.04.01 |
| IEC 60947-4-1:2009 | ||
| EN 60947-4-3:2000/A2:2011 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and | 2014.04.18 |
| IEC 60947-4-3:1999/A2:2011 | motor-starters - AC semiconductor controllers and contactors for non-motor loads | |
| EN 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low- voltage systems with input current > 16 A and < = 75 A per phase | 2014.06.16 |
| IEC 61000-3-12:2011 | ||
| EN 61000-6-3:2007/A1:2011 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | 2014.01.12 |
| IEC 61000-6-3:2006/A1:2010 | ||
| EN 61439-1:2009 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules | 2014.11.01 |
| IEC 61439-1:2009 (Modified) | ||
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules | 2014.09.23 |
| IEC 61439-1:2011 | ||
| EN 61439-2:2011 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies | 2014.09.23 |
| IEC 61439-2:2011 | ||
| EN 61439-3:2012 | Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| IEC 61439-3:2012 | ||
| EN 61439-5:2011 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks | |
| IEC 61439-5:2010 | ||
| EN 61800-3:2004/A1:2012 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods | 2014.12.19 |
| IEC 61800-3:2004/A1:2011 | ||
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests | 2014.06.29 |
| IEC 61812-1:2011 | ||
| EN 300 386 V1.5.1 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements | 2014.01.31 |
| ETSI EN 300 386 V1.6.1 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements | 2015.11.30 |
| ETSI EN 301 489-1 V1.9.2 | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements | 2013.06.30 |
| EN 301 489-34 V1.3.1 | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones | 2014.02.28 |
表2 R&TTE指令协调标准清单中的新标准及其实施日期
| 标准编号及采用国际标准 | 标准名称 | DOC |
| EN 50364:2010 | Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications | 2012.12.01 |
| EN 50401:2006/A1:2011 | Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service | 2014.08.29 |
| EN 55022:2010 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | 2013.12.01 |
| CISPR 22:2008 (Modified) | ||
| EN 55024:2010 | Information technology equipment - Immunity characteristics - Limits and methods of measurement | 2013.12.01 |
| CISPR 24:2010 | ||
| EN 60065:2002/A12:2011 | Audio, video and similar electronic apparatus - Safety requirements | 2013.01.24 |
| EN 60065:2002/A2:2010 | 2013.10.01 | |
| IEC 60065:2001/A2:2010 (Modified) | ||
| EN 60825-2:2004/A2:2010 | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) | 2013.10.01 |
| IEC 60825-2:2004/A2:2010 | ||
| EN 60825-4:2006/A2:2011 | Safety of laser products - Part 4: Laser guards | 2014.05.03 |
| IEC 60825-4:2006/A2:2011 | ||
| EN 60950-1:2006/A12:2011 | Information technology equipment - Safety - Part 1: General requirements | 2013.01.24 |
| EN 60950-1:2006/A1:2010 | 2013.10.01 | |
| IEC 60950-1:2005/A1:2009 (Modified) | ||
| EN 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase | 2014.06.16 |
| IEC 61000-3-12:2011 | ||
| EN 61000-6-3:2007/A1:2011 | Electromagnetic compatibility (EMC) - Part 6-3:Generic standards - Emission standard for residential, commercial and light-industrial environments | 2014.01.12 |
| IEC 61000-6-3:2006/A1:2010 | ||
